Add Print Details

You can specify what is included on the printed output. The settings can be made either from the card level (for an individual chart), or from Settings (as default for all charts), as follows:

1. Go to Settings > Default Settings.
2. Got to Print Detail settings
   
3. Select one or more of the following to be shown on the print output:
• Chart Speed: The Time axis for the chart
• Instrument Id: The ID of the relevant instrument
• Print Deviation: (Auditor option only): Deviations from the original UHH data (Channel selection, Message selection and Sample data selection) are detailed in the chart printout
• Sample Interval: The time interval between samples
• Show milliseconds: Displays milliseconds wherever applicable
• Start/End Time: The Start and End time of the sampling
• Time of Print: The time the print output was generated
  
4. Click on Save print detail.

The selected details will be visible on all chart printouts, unless Group or Individual Chart print settings are set.