Pre-defined EPM Solution System Alarms

EPM Data Management includes a number of pre-defined alarms. Selecting the System Alarms icon displays the Alarm Summary screen with the system alarm filter applied.

The pre-defined alarms include the following, they display with an alarm type of digitalfollowed by the Alarm Type text:

Alarm Type	Description	Action required
ArchiveInstance1Incomplete	Archive instance 1 was started, but did not finish	Check your network connection or USB device is fitted.
ArchiveInstance2Incomplete	Archive instance 2 was started, but did not finish	Check your network connection or USB device is fitted.
ArchiveInstance3Incomplete	Archive instance 3 was started, but did not finish	Check your network connection or USB device is fitted.
BatteryLow	The Real Time Clock (RTC) battery has low power, no power or is missing	Replace the battery, see Replacing the Real Time Clock (RTC) Battery for details.
CalibrationDue	A calibration is due	Contact your calibration engineer, see Configuring a Calibration Due Application Channel for details.
ClockFail	A failure with the RTC has been detected	Reset the RTC from Settings, see Configuring Internationalizationfor details.
DHCPFailOnEN	Active when DHCP configured on an On EN interface but the DHCP server is down	Check your network connection or contact your IT Engineer.
DHCPFailOnFN	Active when DHCP configured on an On FN interface but the DHCP server is down	Check your network connection or contact your IT Engineer.
MediaFull	Active when the respective local media is full	Replace or delete files from the removable media see Configuring Archive Servers and Configuring Manual Archive for details.
MediaPercentageFull	Active when the respective local media's used space exceeds 70%	Replace or delete files from the removable media seeConfiguring Archive Servers and Configuring Manual Archive for details.
ModbusServer1InternalError	Activates when a range of serious internal conditions occur for a server instance (configuration/stack/CSV/register-table issues)	Check network connection and that client is online.
NtpSyncFail	Repeated attempts to match time with your (Simple) Network Time Protocol ((S)NTP) server did not succeed	Check your network connection or contact your IT department to look into any (S)NTP issues.
RecOverflow	Active when the recording queue overflows due to data being inserted into the recording queue faster than it can be written to flash	Check archiving strategy is fast enough. you may need to increase frequency, perform a check of continuous alarms that are generating excessive messages and avoid applying large configuration changes if Audit Trail is enabled.
WebServerCertificateExpiry	Active when webserver certificates is expired	Urgently configure new certificates, see Configuring Certificates for details.
WebServerCertificateWarning	Active when webserver certificates is approaching expiry	Configure new certificates, see Configuring Certificates for details.